Look KEO Classic 3 Clipless Road Pedals with KEO Cleats

Discover the fun and the benefits of riding with the Ko Classic 3 clipless pedal.Simple to use, it is impossible to adjustment the cleat entryrelease tension too low for an easy clip out. Its large and wide contact surface provides excellent pedalling stability.TECHNOLOGIESCHROMOLY SPINDLE FOR MORE RELIABILITYThe Ko Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings 12 mm inside x 18 mm outside and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place.A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. LOOK spindles are only approved after a rotational test of 2 million cycles at 100trmin with a load of 90kg on the centre of the pedal and an eccentric rotation creating a shock on each rotation.LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the centre of the pedal and an eccentric rotation which creates stress on each revolution. This is equivalent to a sprint by Andr GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.Key Features Usage Beginner to advancedBody CompositeAxle ChromolyThreading 916 X 20 mmBearings 1 Ball bearing, 1 needle bearing cartridgePedal Stack Height 15.7 mmDistance Pedal SpindleCrank Arm 53 mmContact Surface Area 400 mmFloat 8 to 12 adjustable springCleats Ko Grip CleatsAngular Movement 0 , 4.5 or 9 according to the cleat colour Black, Grey, RedPedal Weight 140 gr 348 gr per pair with cleats and screwsAccessories A pair of Grey Ko Grip cleats screwsGuarantee 2 years CHROMOLY SPINDLE FOR MORE RELIABILITY The Ko Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings 12 mm inside x 18 mm outside and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place. A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. LOOK spindles are only approved after a rotational test of 2 million cycles at 100trmin with a load of 90kg on the center of the pedal and an eccentric rotation creating a shock on each rotation. LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation which creates stress on each revolution. This is equivalent to a sprint by Andr GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.