Crank Brothers Mallet DH MTB Bike Pedals

Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Mallet DH are the clipless pedal of choice by most Pro World Cup riders.The ability to set the release angle of the cleats to either 15 to 20 means you can be really active on the pedal whilst still remaining attached to the bike. The concave pedal body gives a flat pedal feel with the assurance that you are connected to the bike.Release angle 15 to 20Cleat Premium brass cleats includedWarranty 5 yearsWeight 479g per pairPlatform Extrudedmachined aluminiumWings cast stainless steelSpring 300 series spring stainless steelSpindle Forged scm435 chromoly steelQ factor 57mmInner bearing igus LL glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trailsOuter bearing enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bikeDouble seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedalTraction pins 8mm adjustableExcellent mud shedding using the very open designed pedal platformDual chamfered edges to reduce rock strikesRibbed body for extra traction when unclipped4 sided entry clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedalExtremely lightweight pedal design is very simple with only a few key partsIncreased float 6 of side to side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handlingFit adjustment crankbrothers premium cleats can be adjusted for either 15 or 20 release angle. Zero float cleats can be purchased separatelycrankbrothers pedals are fully re buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit CRB 16051. Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle